Mantis 8570 Betriebsanleitung PDF herunterladen (Seite 7)

Cordless Extended Reach Hedge Trimmer 8570

Technical changes are reserved.

The specied vibration emissions value is measured in accordance with EN ISO 10517. This can be used for any

other hedge trimmer with the same design and type of power supply.

The specied vibration emissions value limits the working time. Stop working if you notice a tingling sensation or a

discolouration (white) of the ngers.

WARNING: When in operation, the tool‘s actual vibration emissions value can deviate from the specied value de-

pending on how the tool is used, as in the following examples or because it is used in another way:

- How the tool is being used and which materials are being cut.

- The tool is well maintained and in good working order. The correct accessories are being used and care has been

taken to make sure they are sharp and in good working order.

- How secure the hand grip is and whether anti-vibration accessories are being used.

- Whether the tool is being used in accordance with its design and as specied in these instructions.

- The tool can cause hand-arm vibration syndrome symptoms if it is not used properly.

WARNING: To make sure, an assessment should be made of the strain exerted when the tool is in use, for example

when the tool is switched off or is idling. This will make it possible to signicantly reduce the strain exerted during the

entire time the tool is in use.

Minimise your risks if the tool vibrates.

Take care of the tool as specied in these instructions and make sure the tool is properly lubricated (if necessary).

If the temperature is 10°C or less, do not use the tools. Prepare a work schedule so that work is distributed over

several days when using tools that exert high vibrations.

Noise emission information in accordance with the German Product Safety Act (ProdSG) and the EC Machine Direc-

tive: the noise pressure level at the place of work can exceed 80 dB(A). In such cases the operator will require noise

protection (e.g. wearing of ear protectors).

Attention: Noise protection! Please observe the local regulations when operating your device.

Technical Specications

Rated Voltage 24 V DC / 1.9 Ah / 45.6 Wh

No-load Speed n

2200 - 3000 min

-1

Maximum cutting length 400 mm

Maximum cutting diameter 18 mm

Angle at which the motor can be set 0° to 135°

Tool length from 1.95 m to 2.35 m

Working height up to 3.5 m

Weight with bar+chain 4.2 kg

Sound Pressure Level (EN ISO 10517) 82 dB(A) K = 2.5 dB

Acoustic capacity level L

(20001/14/EG) 95 dB(A) K = 2.6 dB

Vibration (EN ISO 10517) <2.5 m/s

K = 1.5 m/s

Mains battery charger

Mains voltage 230 V~ / 50 Hz

Charging voltage / Charging current 25.2 V DC / 500 mA

Period of charging approx 3 - 5 hour

1 2 3 4 5 6 7 8 9 10 11 12 ... 51 52

Kommentare zu diesen Handbüchern

Keine Kommentare

Mantis 8570 Betriebsanleitung Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Grasschneider Mantis 8570