Mantis 7566 Betreibershandbuch PDF herunterladen (Seite 9)

Dealer

Assembly

• Slide the left loop handle into the

foam grip and right loop handle.

LOWER HANDLE ASSEMBLY (CONTINUED)

• Slide loop handle through bolts

and over top lower left handle,

then take two lock nuts and

fasten them nger tight.

• At this point, your Mantis

Deluxe XP

Tiller should look like this when lower

handle assembly is complete.

• Place the carry handle between the

lower handles and line up the holes

• Place two of the 1.125” bolts through

holes with hex head on inside of carry

handle and with two lock nuts fasten

them tight with wrench and socket.

• Position the kickstand bracket

just above the bend of the lower

handles. The stamped arrow

should be pointing up.

• Position the kickstand under the

lower handles, line up the holes

and thread the kickstand bracket

bolts into the kickstand.

• Tighten with the 3/8” crescent

wrench.

• Use the 7 /16” wrenches and socket

to tighten the rest of the handle bolts.

• Your Mantis

Deluxe XP

Tiller will look like this when

lower handle assembly and

kickstand is complete.

KICKSTAND ASSEMBLY

401780 Mantis XP Deluxe tiller manual.indd 9 1/24/13 4:07 PM

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 25 26

Keine Kommentare

Mantis 7566 Betreibershandbuch Seite 9