Mantis "E" System Bedienungsanleitung PDF herunterladen (Seite 9)

Tools:

" wrench, pin or screwdriver

1. Lock the gear shaft by inserting the pin or screwdriver

through the aligned keyholes in the gear case cover and the

gear case to prevent rotation (Picture 19).

2. Hold the pin or screwdriver in place and remove bolt by

turning it clockwise (Picture 20), then remove clamping

plate (Picture 21), and worn blade (Picture 22).

3. Place new blade (Picture 23), re-install clamping plate

(Picture 24), and bolt (Picture 25). Use wrench to tighten

the blade-mounting bolt. If bolt is worn or damaged use a

new one. Replace worn or damaged blade and bolts in

sets to preserve balance.

Replacement Blade Installation

Picture 19

Picture 20

Picture 23

Picture 24

Picture 25

Picture 21

Picture 22

WARNING – DANGER

BE SURE UNIT IS UNPLUGGED BEFORE

MAKING ANY ADJUSTMENTS.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Keine Kommentare

Mantis "E" System Bedienungsanleitung Seite 9